Würth Elektronik ICS, the system and component provider of solutions for signal and power distribution, control, display, and operation of functions in mobile machinery and commercial vehicles, is expanding its activities in the key market of Italy. The new subsidiary Würth Elektronik ICS Italia s.r.l., located in San Giovanni Lupatoto near Verona, will offer customers even more comprehensive local support. electronic and electromechanical solutions Würth Elektronik ICS has sup...

DENSO Corporation published the Integrated Report 2022 for the year ended March 31, 2022. DENSO publishes an integrated report every year to foster a deeper understanding among investors and all of its stakeholders regarding the Company’s initiatives toward sustainable corporate value enhancement. green strategies This report includes specific information on the strategies and initiatives that DENSO is pursuing towards 'green' and 'peace of mind', in order to realize its long-term polic...

Energy regulator Ofgem has issued Delta Gas and Power Ltd with a Final Order, compelling it to pay £530,809.20 plus interest in outstanding Renewables Obligation payments. Delta is a non-domestic supplier, serving 1,690 business customers in the UK. Delta failed to pay into the buy-out fund or present the required number of Renewable Obligation Certificates by 31 August and 1 September 2022 respectively, and is now compelled to pay by the late payment deadline of 31 October 2022 with accr...

To ensure the safety of patients and medical professionals, medical electrical equipment is strictly regulated by standards and requirements for product testing. As a primary power source for these electrical devices, medical power supplies, both AC/DC and DC/DC converters–must also comply with these standards so that the medical equipment functions within safety guidelines. This article looks at several of these standards and how to comply with them. IEC standards One of the standards...

Coventry-based ZPN Energy is working with E.ON Drive to provide a fully carbon-neutral powered exhibition stand, initially intended to be first unveiled at Motofest in Coventry which was subsequently canceled due to Her Majesty Queen Elizabeth’s passing.  Instead, the 50 kWh ZPN PWR mobile, off-grid power unit powered ZPN Energy’s stand at the Professional Tow Recovery show using renewable energy from an off-site source - proving that exhibitors can use green energy, even off-g...

Expanding RECOM's AC/DC range, the cost-effective RACM130E-K series in a 2”x4” footprint is available with 130W peak output power from a wide 85-264Vac input. Tightly regulated single outputs available are 12V, 15V, 24V, 36V and 48VDC. Safety certifications include 2MOPP/250Vac medical for ‘B’ or ‘BF’ applications to IEC/EN/ANSI/AAMI ES 60601-1, as well as IEC/EN 62368-1, IEC/EN 60335-1 and IEC/EN 61558-1 for industrial, test and measurement, IT and household...

Orcan Energy, a globallay renowned cleantech company, is progressing in its strong growth course. The company has fully repaid the Economic Stabilization Fund (WSF) loan approved during the COVID-19 crisis, ahead of schedule. Together with the recently closed financing round with two major sustainability funds (Article 9) and the expected fivefold increase in sales, 2022 already marks a significant year in the company's history. WSF The WSF was launched in 2020 by the previous German governme...

ABB and transformational technology and engineering company - Coolbrook have signed an agreement to accelerate the development, industrialization, and adoption of RotoDynamic technology to decarbonize hard-to-abate sectors, such as petrochemicals and chemicals, cement, and steel. RotoDynamic technology replaces the burning of fossil fuel with renewable electricity as the energy source. The new agreement expands ABB and Coolbrook’s existing partnership, launched in January 2022, and was si...

Siemens Digital Industries Software (Siemens) has announced the immediate availability of Siemens’ Capital Electra X, a new cloud-native electrical design software as a service (SaaS) offering that is aimed at individual electrical designers or small teams that require an affordable yet powerful electrical design solution. Part of the Siemens Xcelerator portfolio of software and services, Capital Electra X offers users sophisticated electrical design capabilities with lower cost-of-owners...

With an ongoing emphasis on providing futureproof lighting and energy controls, CP Electronics part of Legrand UK & Ireland has appointed Gilles Silva as its new Director of Product Development. Having gained almost 20 years of experience 14 of which were spent in Legrand Brazil’s R&D team Gilles’ new role will see him take a lead on product innovation at CP Electronics. Focusing on energy efficiency, in line with Legrand’s latest CSR roadmap, Gilles will lead a team o...

Building on the success of the 5W board-mount RAC05-K/480 AC/DC, RECOM now offers 15W and 25W versions with the same ultra-wide input range of 85-528VAC, for line-to-line and line-to-neutral connections in global single- and three-phase AC supplies. Outputs available are 5V, 12V, 15V, and 24V, fully protected against short circuits, over-current and over-voltage. The two new series are certified to IEC/EN/UL 62368-1 and IEC/EN 61010 and are classed as Limited Power Source (LPS). The parts...

Ameren Transmission is hosting three in-person public open houses this week in Clinton, St. Clair, and Madison counties for a transmission project that will bolster the electric grid. The first open house is 6 p.m. to 8 p.m. Tuesday, Oct. 25, at Knights of Columbus Hall, 12454 State Route 143 in Highland. There will be two additional open houses, the first from 11 a.m. to 1 p.m. Wednesday, October. 26, at Summerfield Lions Club, 100 Park Street in Summerfield; and the second from 6 p.m. to 8 p....

Via its subsidiary CKW, Axpo is publishing detailed smart-meter data on power consumption in the Canton of Lucerne. For the first time, energy consumption can be analysed in real-time and compared to the two previous years. The anonymised data is available to all interested parties as "open data" and is unparalleled in Switzerland in terms of detail. The Axpo subsidiary CKW makes this power consumption data available to all interested parties transparently and at no cost on the website....

Schneider Electric, the pioneer in the digital transformation of energy management and automation, is sponsoring the Essex County Habitat for Humanity’s Women Build Event in Essex County, Mass. to support and celebrate women serving their communities and building a better future for their families. The 2022 Women’s Build event is a joint effort between the Essex County Habitat for Humanity and volunteer groups from Institution for Savings and Thrive (through the North Shore Chamber...

Iskra looks forward to welcoming visitors at the Electronica fair in Munich in November. Iskra Team will be at the Messe Munchen exhibition center from November 15-18, 2022, at stand 344, Hall A4. Electronica 2022 Electronica is a trade fair and conference for electronics, and Iskra’s team will be happy to answer all visitor’s questions and look forward to having exciting discussions and creating new business opportunities.  As a globally recognized provider of...

Schneider Electric, a pioneer in the digital transformation of energy management and automation, will present four expert sessions at 2022 PACK EXPO, October 23-26 in Chicago. These sessions will take a deep dive into developing operational sustainability, including the company’s path towards net-zero carbon emissions, building sustainable factories, and navigating cybersecurity in an increasingly connected world. These thought leadership sessions are critically timed to the current state...

On recultivated land at the Garzweiler open-cast mine, well-established partners, the city of Bedburg and RWE, successfully connect another wind farm with a capacity of 28.5 megawatts (MW) to the grid. The five wind turbines of the 30 million Euro - 'Bedburg A 44n' project has the capacity to generate enough green electricity to meet the annual needs of 28,000 households - more than the city's citizens and businesses consume.   The turbines complement the existing Königshovener H&oum...

Every engineer sets out to design for maximum performance of their system, power supply, or any other product they are working on. But what does designing for performance mean? In terms of power solutions, this may refer to the typical tradeoff of size, weight, and power (SWaP) factors, perhaps even including cost (SWaP-C) factors. Designing for energy performance (typically measured in terms of efficiency metrics) implies a focus on optimizing the performance of power supply energy consumption...

Small and medium-sized businesses are highly exposed to high energy prices, and the International Energy Agency and the European Commission held a high-level event to raise awareness of what governments, businesses, and related stakeholders can do to empower and protect these backbones of the European economy. At the online event, which was led by IEA Executive Director Fatih Birol and European Commissioner for Energy Kadri Simson, the Commission presented support measures that are already avai...

Mitsubishi Electric has launched a helpful new guide designed to help building owners and managers reduce the risk of their buildings becoming stranded assets due to not reaching the government’s environmental standards.   The new white paper, ‘Stranded assets: A roadmap to net zero for new and existing buildings' is designed to provide building owners and managers with more insight on the importance of setting up their buildings for net zero and describes method...

Mitsubishi Electric Corporation (Mitsubishi Electric) announced that it has joined the Japan Center for Engagement and Remedy on Business and Human Rights (JaCER) as a Founding Member (Regular Member). JaCER was established in June 2022, in order to support and promote the redress of grievances by companies. JaCER provides a non-judicial ‘Engagement and Remedy Platform’ for grievance redress, based on the United Nations’ Guiding Principles on Business and Human Rights. JaCER&...

Würth Elektronik ICS, inventor of Powerelements for PCB contacting, presents a new generation of its proven, lead-free high-current contacts: the second PowerPlus generation, LF PowerPlus 2.0, has the same properties in terms of torque and current-carrying capacity as the previous version, but it is now even simpler and more efficient in terms of processing and assembly. With the LF PowerPlus product family, Würth Elektronik ICS offers robust and efficient high-current contacts for PC...

Application notes from Würth Elektronik provide users with accurate information and practical tips. Not only for developers, the latest release ANP101: RF Gain Block Amplifier with Integrated Multilayer Ferrite Bead for Broadband Operation addresses how the transmission characteristics of an RF amplifier can be enhanced and improved by the right choice of components and an optimal layout. RF performance From 5G systems to radio and antenna applications, wireless communication accomp...

Schneider Electric, the globally renowned company in digital transformation of energy management and automation, has released new updates to its EcoStruxure™ domain architecture and platform, EcoStruxure Power. The comprehensive IoT-enabled architecture and platform is designed to digitalize and simplify electrical distribution & power management, delivering reliable ‘always-on’ power for commercial buildings, healthcare, data centers, industry, and infrastructure. Integr...

Cummins China and EDF Renewables signed a distributed photovoltaic Power Purchase Agreement in Beijing, aiming to cut down electricity consumption from traditional grids and reduce carbon emissions in Cummins facilities & operations. Cummins will provide the roof & ground space and will consume the generated solar power, EDF Renewables will be responsible for the investment, installation, and operation of solar PV generation equipment. WANG Ning, Vice President of Cummins, and Erwann De...

Schneider Electric, the pioneer in the digital transformation of energy management and automation, has appointed Manish Kumar as the new Executive Vice President of Digital Energy, effective October 1, 2022. The Digital Energy business provides energy and automation solutions to deliver a sustainable and efficient future for customers. Power digitalization is foundational to future-ready energy management. It makes the invisible visible, turning data into business value to enable better decisi...

Schneider Electric, the pioneer in the digital transformation of energy management and automation, offered a sneak peak of the new Square D™ Combination Service Entrance Device (CSED) during the NECA 2022 Convention & Trade Show at booth #2502. Developed with electrical professionals in mind, this product is code compliant to the new NEC 2020 standards, offers new safety features, and provides updated, compact design elements for easy installation. Evolving code requirements Schneid...

WeVee and Enel X Way Germany, the German division of Enel Group's new company dedicated to electric mobility, reached an agreement through which the award-winning JuiceBox charging stations will be available at preferential rates to all WeVee corporate clients. This is the first step of the cooperation between WeVee and Enel X Way, empowering the companies' joint missions of accelerating the switch to clean mobility and sustainable commuting, and trying to extend such agreements to other countr...

Schneider Electric., the pioneer in the digital transformation of energy management and automation, has unveiled a complete preview of its latest sustainable, digital, AirSeT medium-voltage (MV) switchgear ranges, at the Innovation Summit World Tour, Schneider Electric’s annual customer and partner event.   Schneider continues to develop and expand AirSeT ranges in line with its commitment to build a full SF6-free MV portfolio, and to meet requirements of different geograp...

Schneider Electric., the global pioneer in the digital transformation of energy management and automation, announced at the NECA 2022 Convention & Trade Show a wide portfolio of product innovations that will enable electrical contractors and installers to protect themselves from safety risks, while also improving efficiency and reliability. “Schneider Electric is leading the digital transformation of electrical distribution and energy management,” said Michael Lotfy, SVP P...