When it comes to building an energy-efficient pumping system, the selection of the right motor control system is necessary for the pump.
Pump controllers are designed to monitor flow and/or level variables and control the connected pump accordingly to efficiently maintain the levels.
pump controller
C&S Electric introduces a smart pump controller that has been designed using modern technologies
Considering the need for farmers, C&S Electric introduces a smart pump controller that has been designed using modern technologies to save energy and time helping farmers lead a better quality of life.
This newest addition to the already extensive line of C&S pump panels has been manufactured especially for the agricultural industry. The pump controller is a perfect fit for irrigation and similar pumping applications.
Smart pump controller
The Smart pump controller has a remote pump ON/OFF facility using SMS, IVRS, and missed calls based on the model. The smart controller panel monitors the pump parameters like phase-phase voltage, current, kW, kWh, power factor, etc.
This smart controller panel protects the pump motor from overload, dry run, phase unbalance, current unbalance, phase fail, rotor lock, etc. All these parameters’ daily log makes it useful to monitor the efficiency and power consumption of the pump motor.
real-time based ON/OFF timers
Smart pump controller has the facility to add/delete its user via SMS so that registered users can START/STOP
Smart pump controller has a facility of four real-time based ON/OFF timers; and the dry run auto-start timer. This is a very useful facility for farmers as there is no need to START/STOP the pump motor manually.
Smart pump controller has the facility to add/delete its user via SMS so that registered users can START/STOP remote pumps and also get the present running status of the pump.
motor theft detection
The smart pump controller has a unique facility for motor theft detection. This panel monitors the motor terminals continuously. If any of the motor terminals is removed, an alert SMS is sent to the user.
If this panel is shifted from the installed location, an alert SMS is sent to the user with the LAT/LNG position of the panel.
