Eaton C30CNM36A02A0 Mechanically Held Lighting Contactor
Technical Specification
- Make: Eaton
- Model code: C30CNM36A02A0
- Series: C30CN mechanically held lighting contactors
- No. of Poles: 9
- Rated Voltage: 115 ~ 120 V 60 Hz / 110 V 50 Hz
Two-wire mechanically held lighting contactor 30 A power pole rating Low magnetic noise results in quiet operation Low input VA permits long wire runs An ideal solution for controlling tungsten (incandescent filament), ballast (fluorescent and mercury arc), high intensity discharge (HID), non-motor AC resistive and single- & three phase motor ratings load Provides effective control in applications such as office buildings, industrial plants, hospitals, stadiums, airports, and so on
Read more| Make | Eaton |
|---|---|
| Manufacturer | Eaton |
| Category | Motors and Electrical Equipment>Contactors |
| Model code | C30CNM36A02A0 |
| Series | C30CN mechanically held lighting contactors |
| No. of Poles | 9 |
| Rated Voltage | 115 ~ 120 V 60 Hz / 110 V 50 Hz |
| Rated Current | 30 A |
| Enclosure | Open |
| Standards | UL |
| Depth | 7.39 inch |
| Height | 3.86 inch |
| Width | 4.18 inch |
Product description
Eaton's range of Lighting Contactors offers reliable and efficient control solutions for a variety of industrial and commercial lighting applications. With models such as the C30CN, CN35, and A202, these devices provide flexibility in switching tungsten, fluorescent, mercury arc, and other lamp loads.
C30CN Mechanically and Electrically Held
The C30CN boasts unmatched versatility thanks to its fusion of mechanical and electrical holding mechanisms. It's perfect for applications demanding consistent operation regardless of power interruptions. This contactor efficiently manages loads ranging from tungsten to HID and non-motor AC resistive types.
- Handles 30 to 200A with ease
- Supports up to 12 poles
- Delivers quiet, efficient operation with low magnetic noise
CN35 Electrically Held
The CN35 is purpose-built for scenarios where it's unnecessary for contacts to stay closed during control power loss. It is favored in setups like industrial plants and public infrastructures, reliably switching up to 600V for ballast or filament lamp loads.
- Designed for easy installation and maintenance
- Available in models up to 400A
- Built according to NEMA ICS-2 standards
A202 Magnetically Latched
The A202 model, with its magnetically latched design, is suited for environments where sustaining contact during power variance is critical. These latch reliably under high inrush currents, common in large tungsten or fluorescent lamp applications.
- Instantaneous latching through magnetic fields
- No continuous control power is needed once engaged
- Suitable for vast settings, including office buildings and airports
Ideal Use Cases
The lighting contactors from Eaton ensure effective light management in varying environments, from small office spaces to large public venues such as airports and stadiums. Their advanced control capabilities reduce operational disturbances, ensuring energy efficiency and enhanced safety.
More Eaton Contactors
- See other Eaton products
- Eaton Safety Switches and Disconnects
- Eaton Busway
- Eaton Circuit Breakers and Fuses
- Eaton Cable Tray
- Eaton Transformers
