Eaton C30CNM63A02A0 Mechanically Held Lighting Contactor
Technical Specification
- Make: Eaton
- Model code: C30CNM63A02A0
- Series: C30CN mechanically held lighting contactors
- No. of Poles: 9
- Rated Voltage: 115 ~ 120 V 60 Hz / 110 V 50 Hz
Two-wire mechanically held lighting contactor 30 A power pole rating Low magnetic noise results in quiet operation Low input VA permits long wire runs An ideal solution for controlling tungsten (incandescent filament), ballast (fluorescent and mercury arc), high intensity discharge (HID), non-motor AC resistive and single- & three phase motor ratings load Provides effective control in applications such as office buildings, industrial plants, hospitals, stadiums, airports, and so on
Read more| Make | Eaton |
|---|---|
| Manufacturer | Eaton |
| Category | Motors and Electrical Equipment>Contactors |
| Model code | C30CNM63A02A0 |
| Series | C30CN mechanically held lighting contactors |
| No. of Poles | 9 |
| Rated Voltage | 115 ~ 120 V 60 Hz / 110 V 50 Hz |
| Rated Current | 30 A |
| Enclosure | Open |
| Standards | UL |
| Height | 3.86 inch |
| Depth | 7.39 inch |
| Width | 4.18 inch |
Product description
Eaton’s C30CNM63A02A0 is a versatile and efficient 30A Mechanically Held Lighting Contactor ideal for industrial and commercial lighting applications. Designed for environments such as office buildings, industrial plants, hospitals, and airports, this contactor ensures that the control power failure does not switch the contactor to an off position.
Key Features
- Mechanically held operation for noise-free functionality
- Elimination of coil losses after latching
- Control module with microprocessor validation
- Built-in 0.4-second delay to prevent contact fatigue
- Compatibility with different load types including tungsten, ballast, and high-intensity discharge
- Support for both two-wire and three-wire controls
Technical Specifications
- Power poles rated at 30A and 9 poles
- Rated for 600 volts maximum
- Low magnetic noise for quiet operation
- Wide range of input voltages supported, from 24 Vac to 277 Vac and 12 Vdc to 24 Vdc
- AUX contacts rated A600, suitable for low-level circuits
Ideal Use Cases
Suitable for environments requiring efficient and reliable lighting control where noise and energy efficiency are crucial, such as in large commercial buildings and public facilities. The robust configuration options make it adaptable for specific lighting needs, handling a range of load types effectively.
More Eaton Contactors
- See other Eaton products
- Eaton Safety Switches and Disconnects
- Eaton Busway
- Eaton Transformers
- Eaton Circuit Breakers and Fuses
- Eaton Cable Tray
