Electrical Enclosures News

There are few industries where electronics power system reliability and maintenance-free functionality are as critical factors in design as they are in healthcare. Healthcare electronics is often considered the most safety- and reliability-oriented subsets of electronics and is driven by high design and production standards around the world. Safety Standards RACM1200-V meets low leakage current limits for BF-rated applications, as set by the IEC 60601-1 RECOM’s RACM1200-V units are des...

Open Charge Point Protocol (OCPP) is the key to smooth communication between an Electric Vehicle Charging Station (EVCS) and the Charging Station Management System (CSMS). They deep dive into the importance of protocols and promoting open standards. There is no shortage of acronyms in energy and mobility, so they certainly don’t blame anyone for mixing up with the multitude of terms. OCPP is a communication protocol that facilitates the exchange of information between EV chargers and thei...

Volta Trucks, a disruptive full-electric commercial vehicle manufacturer, and services provider has announced the successful conclusion of its Series B funding round, with €37 million secured in new capital. Luxor Capital The funding round was led by Luxor Capital with existing investors extending their investments and strategic partners joining the Volta Trucks journey, showing clear belief in the company’s future success, and endorsement of its strategy and potential. Luxor Capit...

Gephart Electric has teamed up with Ancoats Construction for the new SICK, Inc. Campus USA in Bloomington, MN. SICK is a pioneer manufacturer of factory, logistics and process automation technology worldwide. This is the first phase in a larger master plan for SICK – a longtime client of Gephart – to consolidate all operations in one location. The new 140,400 SF building includes 38,400 SF of office space, 66,000 SF of logistics/warehouse space, and 36,000 SF of production/assembly...

United Electric Controls (UE) designs and manufactures industrial safety and control solutions for alarming and emergency shutdown of process equipment. UE recently celebrated 90 years in business at its headquarters in Watertown, Massachusetts. The company was incorporated in the Boston area in 1931 after combining two then-recent inventions – the metal bellows and a snap-acting switch – to create a control for oil burners. UE survived the Great Depression by providing thermostatic...

United Electric Controls (UEC) designs and manufactures industrial safety and control solutions for alarming and emergency shutdown of process equipment. UEC recently celebrated 90 years in business at its headquarters in Watertown, Massachusetts, USA. Surviving the great depression The company was incorporated in the Boston area in 1931, after combining two then-recent inventions, the metal bellows and a snap-acting switch to create a control for oil burners.  United Electric Controls...

In-Charge Energy, the industry pioneer in turnkey commercial fleet EV infrastructure solutions, has announced the appointment of Cliff Fietzek as Chief Technology Officer. Fietzek will oversee the company’s In-Control charging network platform, charging hardware, and overall technology to assure successful implementation of EV charging solutions for the company and its partners. Authority comment “We are thrilled to welcome Cliff to In-Charge Energy. He has proven through the last...

Industry 4.0 continues to gather steam as organizations look for ways to increase efficiencies and reduce costs. As companies clamor to digitize every aspect of their organization, they are rapidly adopting automation and intelligent technologies to accelerate the pace of digital transformation. However, when it comes to some asset-intensive industries, such as power generation, water & wastewater, chemicals, and mining, it’s cost-prohibitive and simply not realistic to try and immedi...

Luminus Devices announces the launch and immediate availability of a new high-efficacy family of 3030 Mid-Power LEDs designed for high-performance general lighting and horticulture applications. These new MP-3030-120H ultra high-performance LEDs provide low thermal resistance, up to 226 lumens/Watt, high PPF/W, and CRI options of 80, 90, and 95 minimum. In addition, they are compatible with standard SMT reflow solder process and are RoHs and REACH compliant. New high-volume orders Customers...

RECOM has launched an eighth-brick DC/DC converter series with 9-60 VDC input and optional 12, 24, or 48 V outputs rated at 150 W. The RPA150E series has an industry-standard pin-out with outputs trimmable over a wide ±20% range to include 28 V for avionic systems and 57 V for PoE applications. The 6:1 input range covers nominal 12, 24, and 48 V system rails with sufficient margin to include 48 V battery charging voltage and 12 V battery cranking voltage dips. High efficiency of the RPA...

In-Charge Energy, the pioneer in turnkey commercial fleet EV infrastructure solutions, has announced its latest hardware offerings for fleet EV charging. These innovative products address the unique reliability, durability, accessibility, and serviceability needs of fleet owners, managers, and drivers from nighttime visibility and safety to ruggedness for extreme weather conditions. User-friendly charging options A well-designed charging infrastructure can optimize an entire fleet, reducing t...

Cuvée Systems® has announced its EZI-Set series of ultra-compact LED drivers (non-dimmable) that offer superior performance with four form factors. The constant current output is configurable via dip-switches to maximize application flexibility, ease of use, and simplified inventory management for manufacturers and installers. These drivers are ideal for small form factor directional lighting applications using COBs, including downlights, spotlights and track lights. Three different...

The electronics industry is one of the fastest-growing industries of the last half-century, and the amount of information generated by this industry can be mind-numbing. If the user is an electronics design engineer who utilizes product datasheets and user guides, they will very well know the challenges of finding accurate and consistent information across different manufacturers, product categories, and even product lines. design cycle Product information sharing has been revolutionized with...

RECOM announces the launch of a range of regulated SIP8 DC/DC converters with high power density and industrial temperature range. RECOM, the industry pioneer in power conversion, has announced the launch of the RS3E family of DC/DC converters in an industry-standard SIP8 format and pin-out. The parts are rated at 3W with no derating to 70°C and feature 2:1 input ranges of 4.5-9V, 9-18V, 18-36V, and 36-72V. RS3E family features Fully regulated outputs available are 3.3V, 5V, 9V, 12V, 15V...

Würth Elektronik has extended its WE-RJ45-10G product group with four new models. Three tab-down models join the existing Ethernet connectors with integrated transformer in tab-up design. These models have the recess for the connector tab on the underside. All four new RJ45 integrated transformer connectors feature an extremely low-profile package. New WE-RJ45-10G series models One of the models is especially suitable for particularly flat assemblies One of the models is especially suit...

According to a report in a pioneering magazine, the number of people getting affected by the illnesses caused by bacteria and germs is rising each year. Do they know that electrical switches are a breeding ground for germs and bacteria?  They commonly spread through contact, which can even occur when they touch an already contaminated switch, putting the family at a health risk. People are realizing the importance of prevention and thus switching to antibacterial switches for the complete...

Luminus Devices has expanded its portfolio of dynamic COB modules with the addition of RGBW tunable LED spot modules. The CTM-9 & 14 RGBW modules feature four-channel red, green, blue, and warm white MP-1616 XNOVA Cube LEDs on metal PC boards. With all four channels using the same InGaN blue die inside, the phosphor-converted red, green, and white LEDs create consistent InGaN performance and uniformity over wide temperature, current, and time ranges creating smooth spectrums and uniform lu...

In cooperation with E.ON and the University of Duisburg Essen, the smart grid company gridX has developed an artificial intelligence (AI) system that optimizes charging processes in conjunction with dynamic load management based on historical charging data, energy quantities, and vehicle idle times. gridX already equipped an office location of the Essen-based E.ON Group with dynamic load management last year, which is now being taken to the next level with the help of artificial intelligence....

The Austrian design-in distributor will present power supply manufacturer RECOM with the CODICO Quality Award on 29 April 2021. In addition to delivery reliability and logistics services, CODICO particularly emphasizes the manufacturer's ability to innovate. Cooperation with high-performance suppliers makes a significant contribution to the long-term success of the company. It is a basic prerequisite for CODICO's Design In concept. sample shipments and service RECOM, a power supply speci...

Volta Trucks, the pioneering full-electric commercial vehicle manufacturer, has confirmed that the Volta Zero will make its Italian debut between 7 and 11 June in Milan. The customer event in Italy comes soon after similar successful French and Spanish events that have seen over 600 individual demonstrations of the Volta Zero in COVID-secure environments.  Road-to-Zero Emissions strategy The arrival in Italy also follows the company’s recently announced Europe-first principles with...

Applied Sensor Technologies (AST), a manufacturer of standard and custom-designed RTDs and thermocouples for OEMs, process and discrete industries, announced that their UNI5 product line of terminal head-mounted transmitters can now be configured via a smartphone or tablet using Near Field Communication (NFC®) or a Bluetooth® modem.  The app makes set-up and configuration quick and simple, but also field-capable. Configuration changes "When customers needed to...

Cuvée Systems® has announced its Universal Quad Mode Driver ideal for both residential and commercial applications. This is the industry’s first universal driver that can dim by all 4 commonly used dimming methods: phase-cut leading edge or trailing edge, 0-10V, or PWM. This deep-dimming (<1%) driver is being sold in three different constant current outputs: 350, 500, and 700 mA. With multiple international certifications, an ultra-compact size, and plastic and metal housing...

Electric Ireland, along with acclaimed garden designer Diarmuid Gavin, officially launched its Home Electric+ plans for homes with smart meters installed. Electric Ireland’s Home Electric+ plans will help customers learn more about their energy usage, decrease their overall electricity usage and reduce their bills by availing of cheaper electricity at different times of the day.  Electric Ireland’s free Home Electric+ plans all have the following benefits accessed thr...

Addressing the changing times and needs of their customers, SACMI USA has adopted OverIT’s Augmented Collaboration product to enhance their dispatching of technicians for maintenance work orders in the USA, as well as provide real-time support in a virtual setting. SACMI USA will improve their service managers’ processes for assigning work orders, thanks to SPACE1’s scheduling tool, which considers the skills and availability of field technicians. AR remote collaboration feat...

Industrial and multiphase plugs and sockets provide a connection to the electrical mains rated at higher voltages and currents than household plugs and sockets. They are generally used in polyphase systems, with high currents, or when protection from environmental hazards is required. Industrial outlets may have weatherproof covers, waterproofing sleeves, or may be interlocked with a switch to prevent accidental disconnection of an energized plug. Construction and Color Coding Plugs...

Luminus Devices introduced its new Hospitality COB Series. With LES sizes ranging from 6 mm to 22 mm, and lumen output from 500 to 5000 lumens, the Luminus Hospitality COB series is the smart choice for beautiful, warm light with excellent color rendering and precise two-step SDCM color control standards.  As LEDs have been adopted into indoor illumination applications over the past decade, the industry has reached impressive cost and energy efficiency goals, but for Luminus, the focus has...

NewEnergy, LLC and Luminus, Inc. have recently introduced new linear modules built with Salud MP3030 LEDs. Salud LEDs are engineered to achieve specific melanopic/photopic ratios in addition to providing light that is both comfortable and renders true colors. NewEnergy’s Salud linears deliver light that keeps people healthy, alert, and productive and is available in 3000 K, 4000 K, and 5000 K. These linear modules are ideal for indoor applications including offices, schools, nursing home...

Swedish start-up Starbit has been awarded two major contracts in the Nordic region for its Smart Retail and Smart Cities hi-tech solutions. Scandinavian retail chain, Coop Norden, will be piloting Starbit’s latest smart queuing system with AirSwipe technology along with a payment card-reader upgrade on their self-service solutions across its 850 stores. Starbit’s smart queuing systems make businesses more efficient by reducing manual workload for staff and streamlinin...

Volta Trucks, the start-up manufacturer of the full-electric Volta Zero, has confirmed that Belux-based VPD Transport and Logistics will trial and purchase the Volta Zero as part of its drive towards decarbonizing its distribution fleet. VPD Transport and Logistics already operates over 100 vehicles, from trucks to Cargo Bikes, but the Volta Zero is the first full-electric large commercial vehicle to enter its operations. With over 50 years of experience, and more than 150 employees, VPD Transp...

At Gephart, safety is the number one priority, which is why they are so proud to be awarded the Subcontractor Safety Award for 2019 from Ryan Companies for the work at the 10 West End project. Led by an outstanding field leadership team, the crew understands that communication is key and participates in daily pre-task planning huddles to promote a safe start, weekly toolbox talks, and quarterly safety lunches. The goal, and end outcome, is to reduce risks, minimize disruptions, and increase effi...