Lovato Electric S.P.A. News

Near Field Communication (NFC) is a technology that provides short-range two-way wireless connectivity. Using the LOVATO Electric NFC App, it is possible to access the product parameters setup in a simple way. They just need to start the App on a smart device and bring it close (with NFC connection enabled) to a compatible LOVATO Electric product (TMM1NFC, PMV95N … NFC, ADXL …, DCTL …, ATL800, ATL900, ATL500, RGK4 … SA, FFL …). Equipped with NFC technology T...

To meet light and acoustic status signaling requirements, LOVATO Electric is introducing the new range of LTN series signal towers in two versions: Ø50 mm and Ø70 mm. Their modular design assures unbeatable flexibility and the freedom to configure solutions for any application. Up to five modules can be installed, either all light modules or four light modules and one sound module. integrated 24 VDC LED module The light modules can emit flashing or steady light, a...

To meet light and acoustic status signalling requirements, LOVATO Electric is introducing the new range of LTN series signal towers in two versions: Ø50 mm and Ø70 mm. Their modular design assures unbeatable flexibility and the freedom to configure solutions for any application. Up to five modules can be installed, either all light modules or four light modules and one sound module. integrated 24 V DC LED module The light modules can emit flashing or steady light,...

LOVATO Electric‘s response to this need is a new series of rigid connections for motor starters and changeover contactors. Conventional cabling involves flexible cables cut to size and connected to each pole, often in inconvenient positions and with a very high probability of error. Cabling a panel quickly and without making mistakes in restricted space conditions is a complicated, difficult business. LOVATO‘s rigid connections The connector’s insertion point is easily visua...

Compact and competitively priced, the new PSE1 series single-phase power supplies are the perfect solution for the supply of loads and equipment installed in panels with limited spaces. Their ultra-compact housing makes them suitable to be installed in small enclosures, to supply electromechanical and electronic devices with DC control, such as contactors, timer relays, sensors, PLCs, DC motors, displays, SSRs (solid state relays), and other equipment normally found in automation syst...

With a uniquely compact design and robust construction, they are ideal for switching, circuit breaking, and control applications. They are available in a wide range of variants and configurations to satisfy any application requirement, from the most conventional to the most unusual. All variants offer a wide range of options and up to 12 switching positions. In addition to the existing 7GN and GX series, LOVATO Electric has now expanded its offer with the GF, GNA20 and GN se...

In power generation applications, the rules governing connection to utility grids are set out in standards CEI 0-21 and CEI 0-16. In particular, the standards require that an interface protection system (IP) be installed to monitor the status of the grid, so that the generation system can connect to it. The standards also specify that the powered components of the system (including the interface protection relay, contactor coil and backup disconnector coil, if present) maintain power for at lea...

The switching technology, designed for very fast actuation, allows the using of these devices for switching loads in category AC23A up to 630A at 400V or 500A for higher voltages. GL switch disconnectors feature a compact body. The four-pole version can be made up directly by the client thanks to the supplementary fourth pole (available separately) which, like the neutral and earth terminals, can be installed on both sides of the switch with two screws included in the kit. The switch disc...

Fast installation and simplified logistics are critical requirements for panel builders, wholesalers, and OEMs. The demand for assembled changeover switches and ready-to-use complete switch disconnectors is growing fast. That’s why LOVATO Electric has taken care of these needs by expanding its offer of switch disconnector solutions.  Take a look at these new products: Assembled Changeover Switches With 12 codes to cover most of the applications from 25A to 160A...

Thanks to the variety of configurations available, the new Platinum series complete control stations can satisfy the most sophisticated and diverse application needs. Each unit is composed of a combination of several elements of actuators, control stations, and contacts in a common and compact design. Control stations The control stations, made of polycarbonate, are open with yellow or grey covers with one to three holes Let’s start with the actuators. Flush pushbuttons, mushroom...

Simple, compact, and versatile, VT1 variable speed drives are the solution for innumerable industrial and service sector applications. Designed to control three-phase motors, they are ideal for controlling pumps, fans and air conditioning systems, packaging machines, belt conveyors, automatic doors, and many other applications. Their extremely compact size makes them particularly suited to installation in electrical enclosures and machines with limited space availability. Modbus-RTU...

The surge protection device type SG2 with plug-in cartridge for photovoltaic applications is suitable for installation on the direct-current end of a photovoltaic installation and protects against induced overvoltage conditions. The protection cartridges are plug-in and can be easily replaced for quick servicing. Operational characteristics EN maximum continuous voltage Ucpv: 600 V DC, 1100 V DC, 1500 V DC; Versions with or without relay output having a changeover contact for remote status...

LOVATO Electric has expanded the series of GD switch disconnectors with the introduction of new codes specifically designed for photovoltaic applications. In only 54 mm width, they reach a rated operating voltage of 1500 VDC. Here are the main features: Up to 40 A at 1000 VDC, 32A at 1200 VDC, and 25 A at 1500 VDC. Modular construction. Jumpers for connecting the poles in series are supplied as standard with disconnectors. Screw or 35mm DIN rail fixing. Padlockable in 0 position wit...