Product News

Device and end-user protection against potentially damaging voltage, current, and temperature conditions are needed in applications like USB Type-C® alternating current (AC) adapters, networking equipment, and consumer and industrial electronics. Using conventional fuses or positive temperature coefficient thermistors (PTCs) can provide compact solutions and some protection. Several applications However, a growing number of applications require higher levels of protection and greater flex...

Most electronic enclosures need some form of air ventilation to keep cool the electronics within. If this is a RFI/EMI shielded enclosure then the overall shielding effectiveness of the enclosure can be compromised. For many commercial applications, perforated sheet, metal or metallized plastic will suffice, but for high performance requirements, waveguides provide superior shielding over a wide frequency range. Waveguides offer superior shielding Waveguides can be circular, rectangular or ho...

Innodisk, a globally renowned company in industrial-grade storage and embedded peripherals is proud to announce its solution to issues faced by Automated Optical Inspection (AOI) applications relating to, and caused by the shortcomings of consumer DRAM. Innodisk AI With the recent launch of Innodisk AI, which provides a complete AI (Artificial Intelligence) solution for industrial integrators, DDR5 series DRAM plays a key role for a variety of applications, including Automated Optical Inspecti...

As an electrical sub-contractor, daily jobsite documentation is critical for Canyon State Electric to ensure quality control and share on-site progress with key stakeholders. Before using StructionSite, capturing, organizing, and sharing photos was disjointed. Canyon State Electric had to rely on the foreman to capture site progress, who then had to fill out a Google Form to track pictures and log them into the CSE systems. The office coordinator was responsible for going through these images a...

Mitsubishi Electric Corporation announced that two new 12.75-13.25 GHz (Low-Ku band) 70W (48.3dBm) gallium-nitride high-electron-mobility transistors (GaN HEMTs) will be added to the company's GaN HEMT lineup for satellite-communication (SATCOM) earth stations. data-transmission capacity The two GaN HEMT products, one for multi-carrier communications and the other for single-carrier communications, support increased data-transmission capacity and smaller earth stations ev...

Two new ranges of cost-effective switching regulators are announced - the RPMGQ-20 and RPMGS-20 open-frame, through-hole, non-isolated DC/DC buck converters with 20A output rating. RPMGQ-20, RPMGS-20 The RPMGQ-20 is in an industry-standard quarter-brick format while the RPMGS-20 is in the emerging standard package size of 36.83 x 34.04 mm with a standard sixteenth brick pin-out. Both products have a maximum height of 15mm from their mounting surface. The parts operate from an 18V-75V input an...

Mitsubishi Electric Corporation announced that its new SLIMDIP-Z power semiconductor module, featuring an extra-high 30A rated current for use in inverter systems of home appliances, will be released in February 2023. The compact module will enable the SLIMDIP™ series to meet a wider range of power and size needs for inverter units, specifically by simplifying and downsizing systems for multifunctional and sophisticated products such as air conditioners, washing mach...

Power electronics engineers understand the complexity of power module selection for their specific applications. With SemiSel 5, SEMIKRON offers a new simulation tool to ease this burden. Starting with a blank sheet of paper, the team created SemiSel 5 around the needs of power electronics developers. With its brand-new user interface, power module selection is even easier through only five simple steps. Webinar details  In the first section of this webinar, Martin Röblitz will guid...

Siemens is expanding its generator circuit-breaker portfolio with a new compact version - the HB1-Compact (HB1-C). The versatile and highly customizable solution uses maintenance-free vacuum switching technology and addresses the most challenging of constraints. Available in L-shape and I-shape designs, the HB1-C can be mounted either vertically or horizontally and can be adjusted to match existing busbar connection points. Additionally, the generator circuit-breaker and its integrated main dis...

Mitsubishi Electric Corporation has announced that it will begin shipping samples of a new thermal sensor that is capable of measurements up to 200 °C, on February 1, 2023. The company’s existing MelDIR, launched in 2019, measures temperatures from -5 °C to 60 °C for applications including heating, ventilation and air conditioning (HVAC), security, people counting, and smart buildings. New MelDIR ‘MIR8060B3’ The new MelDIR ‘MIR8060B3’ uses advanced si...

Luminus Devices has expanded its human-centric lighting portfolio with the introduction of the Salud COBs. These recently released COBs have high R9 values, high melanopic/photopic ratios and 90 CRI minimum in warm CCTs that enable users to meet WELL Building requirements. In addition, these LEDs possess exceptionally long color stability, excellent optical emission uniformity, as well as color over angle consistency and superior thermal conductivity for uniform heat spreading. Salud™ CO...

Luminus Devices has expanded its human-centric lighting portfolio with the introduction of the Salud COBs. These recently released COBs have high R9 values, high melanopic/photopic ratios, and 90 CRI minimum in warm CCTs that enable users to meet WELL Building requirements. In addition, these LEDs possess exceptionally long color stability, excellent optical emission uniformity, as well as color-over-angle consistency, and superior thermal conductivity for uniform heat spreading. Salud COBs T...

Designing a reliable wind converter is an increasingly difficult task with the ever-growing power requirements. The highly reliable, sintered SKiiP 4 has had a power boost. This highly integrated package provides a further 25% increase in power. SKiiP SKiiP is a proven platform with millions of units in the field, allowing for continuous improvement in reliability and performance. Design effort is reduced through an integrated package including a power module, driver, current sensors & coo...

Mitsubishi Electric Corporation announced its development of a quantum artificial intelligence (AI) technology that automatically designs and optimizes inference models to downsize the scale of computation with quantum neural networks. The new quantum AI technology can be integrated with classical machine learning frameworks for diverse solutions. THz imaging Mitsubishi Electric has confirmed that the technology can be incorporated into the world's first application for terahertz (THz) imag...

90W versions of the popular and cost-efficient RACM 2”x4” AC/DC series are available with wide 85-264Vac input range and a selection of tightly regulated outputs including 12V, 15V, 24V, 36V and 48VDC. The series includes safety certifications to medical standard IEC/EN/ANSI/AAMI ES 60601-1 for 2MOPP ‘B’ and ‘BF’ applications as well as IEC/EN 62368-1, IEC/EN 60335-1 and IEC/EN 61558-1 for reinforced isolation in industrial, IT, test and measurement and house...

Siemens is expanding its family of Reyrolle protection devices with the launch of the 7SR46. Complementing an extensive portfolio of protection relays for distribution and industrial grids, the primary application for the Reyrolle 7SR46 is to provide overcurrent and earth fault protection in medium voltage distribution transformer stations. Mounted in a ring main unit, the protection device detects cable faults on the network and operates quickly to disconnect the fault. The 7SR46 dual-powered...

Mitsubishi Electric Corporation has announced that its new KD-CXF series of contact image sensors (CISs) equipped with the industry’s deepest depth of field will launch in December 2022, beginning with the KD6R1064CXF-NL model. Contact image sensors (CISs) are widely used in manufacturing to inspect product surfaces for scratches, dirt, mis-coloring or mis-positioning of printed labels, plastic film, etc. Contact image sensors (CISs) Mitsubishi Electric’s CIS lineup comprises comp...

Camden Door Controls is pleased to announce that SureWave™ CM-336 Series (battery-powered wireless switches) and CM-333 Series (battery-powered relay output touchless switches) can now be surface mounted utilizing Camden’s new CM-23DSER narrow surface box. This mounting box features a two-piece flame and impact-resistant ABS construction. Surface mounting boxes Extra deep narrow surface mounting boxes can be purchased separately or as part of Camden’s SureWave™ CM-336...

Siemens is expanding its generator circuit-breaker portfolio with a new compact version, the HB1-Compact (HB1-C). The versatile and highly customizable solution uses maintenance-free vacuum switching technology and addresses the most challenging constraints. Available in L-shape and I-shape designs, the HB1-C can be mounted either vertically or horizontally and can be adjusted to match existing busbar connection points. customizable features Additionally, the generator circuit breaker and its...

Delta, a global pioneer in power and energy management announced its new EV charging management system, DeltaGrid® EVM, an innovative platform featuring artificial intelligence (AI) capabilities and seamless integration with energy infrastructure (solar energy and energy storage), is enhancing the power stability and operating efficiency of EV charging sites across the world. Electrical safety, billing, and day-to-day management are critical issues to support the rapid growth of EV charging...

Luminus Devices has announced the release of the SBT-10X-UV LED series, an innovative surface mount device (SMD) that utilizes Luminus’ latest Gen5 die architecture. end-system performance Delivering up to 75% higher output than Luminus’ Gen4 die, the Gen5 technology achieves a flux of up to 5W from a single 1 mm2 class chip.  As such, it improves end-system performance for the most demanding curing applications including 3D printing, curing, and maskless lithography, where m...

A new 300W-rated half-brick DC/DC converter, the REC300H-W, is now available with a wide 9V to 36VDC input and output options of 12V, 15V, 24V, and 48VDC isolated to 3kVDC/1 minute. Additionally released, the 150W-rated REC150H-UW has an ultra-wide input range of 9V to 75VDC with the same output voltage options, apart from 28V and 54VDC to suit avionic systems and PoE applications, isolated at 2.5kVDC/1 minute. EMC specifications REC300H-W and REC150H-UW products are regulated and protected a...

Ingeteam has developed the INGECON® WIND FULL CONVERTER MV, a new product range of medium voltage full power converters designed to improve the performance of the world’s most powerful offshore wind turbines. The converter is already available for offshore turbines up to 15MW and is projected to be ready for 18MW machines by 2024. This latest innovation is part of Ingeteam’s suite of full power drive train components, including the high-performance INDAR generators. The com...

ABB has extended its all-compatible family of machinery drives with the new ACS180 variable speed drive (VSD) for applications up to 22 kilowatts (kW). This easy-to-use and compact VSD brings reliability and performance for machinery builders. The ACS180 is designed for OEMs and system integrators across several industries and for a wide range of applications. The ACS180 can control for example: conveyors, pumps, fans, mixers, and compressors, in a wide variety of industry sectors, including fo...

Luminus Devices announces the launch and immediate availability of the CFT-90WDH, a compact monolithic cool white LED source centered around the 6000K color temperature with a high CRI (color rendering index) of 93. These LEDs are capable of being driven at very high currents (up to 27A) under both CW and PWM conditions and delivering 3200 lumens typically at 22.5A. robust design In addition, these LEDs provide an extremely low thermal resistance chip-on-board package coupled with a robust de...

Six MIDI fuses in one robust, IP66-compliant housing: The REDline Power Box 6F is the latest development in the family of REDline Power Boxes, the successful power distribution platform from Würth Elektronik ICS, used for installation in battery, engine, and chassis areas. Measuring only 170 x 112 x 48 mm, the compact sealed housing provides space for up to six MIDI fuses in 32 V and 70 V versions. The high IP rating allows OEMs to install the box in the chassis, battery, and engine areas....

Schneider Electric, the global specialist in energy management and automation, has announced that its Wiser Gateway and Wiser Smart Plug are among the first group of products in the world to achieve Matter certification, furthering the company’s complete home energy management offering. Matter is the new unified interoperability protocol that connects compatible smart home devices and systems from different brands with one another, ensuring they are secure, reliable, and easy to use. Wis...

Scolmore continues to build its portfolio of products and solutions dedicated to healthcare settings, with the introduction of a range of Equipotential Bonding Busbars (EBBs). In accordance with the Requirements for Electrical Installations BS 7671:2018 AMD2 Section 710 (Medical Locations) and the Health Technical Memorandum HTM06 01:2017, all Group 1 and 2 Medical Locations are to have an Equipotential Bonding Busbar (EBB) and associated supplementary protective equipotential bonding insta...

LOVATO Electric’s range of fuse holders has been expanded to cover photovoltaic applications up to 1500 VDC. There is also a new version with a pilot light to indicate when the fuse has tripped. The fuse holders are designed for 35 mm DIN rail mounting. gPV class fuses can be used in applications up to 20A (10x85 mm) and 32A (14x85 mm). Fuse holders FB04D1P–FB04D1PL Operational characteristics: IEC rated voltage Un: 1500 VDC IEC rated current In:...

Expanding RECOM's AC/DC range, the cost-effective RACM130E-K series in a 2”x4” footprint is available with 130W peak output power from a wide 85-264Vac input. Tightly regulated single outputs available are 12V, 15V, 24V, 36V and 48VDC. Safety certifications include 2MOPP/250Vac medical for ‘B’ or ‘BF’ applications to IEC/EN/ANSI/AAMI ES 60601-1, as well as IEC/EN 62368-1, IEC/EN 60335-1 and IEC/EN 61558-1 for industrial, test and measurement, IT and household...